The Behringer Europower EP4000 Power Amplifier has been over-engineered, with hyper-attention paid to every part of the circuitry. It takes massive pulses of current and voltage to move a woofer cone quickly enough to reproduce a kick drum beat. We’re talking transient response – the holy grail of amp designers. Employing carefully selected transistors with ridiculously high slew rates, the EP4000 can react immediately to even the most challenging electronic low frequency impulses. If your PA system’s woofers can keep up with the music, your audience will hear tighter, crisper sound. And that’s a good thing.
The Behringer Europower EP4000 is fitted with a Clip Limiter, so you can wring max power out of the amplifier without overdriving it – or your speaker system. Built-in circuitry automatically senses when the EP4000 is about to clip, then momentarily reduces input levels to sidestep clipping. All this occurs in a few thousandths of a second, giving you an inaudible method to avoid audible distortion. (If you’re feeling lucky, of course, you can always switch the limiters off!)
Behringer’s Europower EP4000 is packed with notoriously reliable Toshiba/Fairchild power transistors, as well as a high-current toroidal transformer that gives you uber-high transient response and brick-like reliability. Independent DC and thermal overload protection circuitry on each channel protects the amp (and your speakers) from show-stopping meltdowns. Best of all, there’s no need for fuses – one less headache to deal with. If reliability is important to you (and why wouldn’t it be?), the Behringer Europower EP4000 stereo power amp will give you peace of mind, along with great sound.
Power Output (per channel, both channels driven, 20 Hz–20 kHz, 0.1% THD):
2 Ω: 1,250 W
4 Ω: 950 W
8 Ω: 550 W
Peak Power (per channel, both channels driven):
2 Ω: 2,000 W
4 Ω: 1,400 W
8 Ω: 750 W
Bridged Mode Output (RMS @ 1% THD):
4 Ω: 2,400 W
8 Ω: 1,750 W
Peak Power (bridged mode):
4 Ω: 4,000 W
8 Ω: 2,800 W
Amplifier Class: Class H complementary linear
Accelerated Transient Response (ATR) Technology: Ensures tight and punchy transients
Frequency Response:
10 dB below rated output: 20 Hz–20 kHz
–3 dB points: ~5 Hz–50 kHz
Damping Factor: Greater than 300 at 8 Ω
Signal-to-Noise Ratio: –100 dB unweighted (20 Hz–20 kHz)
Gain / Voltage Gain: 40× (32 dB)
Input Sensitivity: 1.15 V (≈ +3.4 dBu) @ 8 Ω
Input Impedance:
Balanced: 20 kΩ
Unbalanced: 10 kΩ
Connectors:
Inputs: 2× XLR, 2× ¼″ TRS
Outputs: 2× Speakon + binding posts (touch‑proof)
Front-panel Controls: Power switch, independent gain knobs for channels 1 & 2
Rear-panel DIP Switches:
Stereo / bridge-mono selection
Low-cut filter (30 Hz / 50 Hz)
Clip limiter enable
Parallel input mode
LED Indicators: Power, Signal, Clip for each channel
Protection Features:
Independent limiters
DC, thermal, and short-circuit protection
Automated circuit breaker (no traditional fuses)
Cooling System: Variable-speed fan, back-to-front airflow, with removable air filter
Transformer & Output Stage:
High-current toroidal transformer
Toshiba/Fairchild output transistors
Chassis: Rugged, all-steel 19″ rackmount, 2U height
Dimensions:
Width: 483 mm (19″)
Height: 88 mm (3.5″)
Depth: 402 mm (15.8″)
Weight: Approximately 16.6 kg (36.6 lb)
Power Requirements:
100–120 V AC, 50/60 Hz, 15 A
220–230 V AC, 50/60 Hz, 8 A
Maximum Power Consumption: Around 2,600 W
| Vendor | Behringer |
|---|---|
| Type | Disco Amplifiers |
| Sku | 31604730 |
| Barcode | 689076150514 |
| Weight: | 18.0 kg |
